Algodoo

Original by Willy38
http://www.algodoo.com/algobox/details.php?id=193297

I added the ability to control parts of the gun with the keyboard.
You still need to load the ammo into the breach.

Controls:
Right Arrow = Fire
Left Arrow = Cock the hammer
Up Arrow = Close Breach
Down Arrow = Open Breach and Eject Casing

Note: The casing doesn't always eject, ether pull it out with the drag tool or close and reopen the breach.

Reliability:
Reliability is much better. I managed to fire all but one rounds from ammo holders. Thats a 1 out of 28 failure rate.
The failure was due to the killer block used to trigger the round, hit the round while closing the breach. The gun still worked after the failure.
As long as you use the keyboard for opening and closing the breach the gun shouldnt break.

Info about Changes:
First I changed the sim frequency from 60Hz to 200Hz, so It wont run aswell. This was need due to the gun being unreliable when handled harshly.
Which wasn't hard to do in the original. I also edited most of the springs in the gun to work well with keyboard control and higher Hz. I edited the
friction and bounciness of some blocks mainly on the trigger and hammer mechanism, also changed the geometry where the trigger and hammer
interact. I changed the weight of the trigger and the killer block used to fire the round to prevent unwanted movement. The ammunition is unaltered
except for moving the round in the chamber to the ammo holder. I added two blocks to prevent the gun from falling off the stands.


Thanks To Willy38 For The Original.