Algodoo

well thanks!

OK, I'll revise that later. I'm on my cellphone now.

Now it should work well.
kamikaze6900: Can you tell me if it works now? It was glued to the background, so that should be solved too, but I'm on b15.

Well this is really lame, you could put more cylinders? And the gearbox is very bad too. And let's not even talk of the acceleration. I can make this 10 times faster man!

Do the color of the circles next to the lever change? Even if you drag it, it won't do anything because that isn't a functional part, just an indicator.

But if it works perfectly on 2.1.0b8!

That's kinda slow.
2 KHz? you kidding me?

Then I'll have to change the title. Sorry, but it hasn't got solution.

Podrías aprender inglés no? digo yo soy argentino y tengo un huevo de paginas de scenes todas con descripción y título en ingles, y no se mucho igual.

Don't worry Gent!

OK, will try to pump it a little more. I see that the engine is working too much.
Thanks by seeing that.

xd?

Well thanks then!

At position +55 there's a little C polygon.
I was waiting for a track or something...

P.S someone can make a dynamometer test please?

who did rate 1? reason at least?

Hehe, I see that there's a little troll downrating all of my scenes! xd do you think i even care?

no XD dejalo asi

Thanks!
Btw I think I know who da troll is. I've been a bit harsh with someone.

Yes, but it's a lot of trouble because balls have coll. B with self collision, the boxes that prevent the fuel to go down are B too but with no sc and the wheel of my Cadillac was B with no sc, and if it didn't collide with the boxes it collided with the balls (getting them off the engine).
And I'm formatting my comp right now XD so forget improvements for a day or two (im in my cellphone)

Thanks vaidas! There's a troll that rated 1, that's why it's low I guess.
And sure that if you give it more frequency it will go better because the balls collide more frames with the piston. (more accuracy)

It looks well, but didn't you know that if you put to hinges the legacyMode 0 they will stop shaking? (At cost of rigidness, but it's ok for an engine).

I like the new one, but you can improve it ten times more. Get the rods closer to the center of the crankshafts and raise the pistons density. And put the springs at legacyMode 2 or 0, and test different dampenings and strenghts.

I dunno exactly because of the piston oscillation ratio of your engine, but a good way to figure that out is by making a plot with time and angVel, and slowly increasing weight until you see that the variation is 5 rad/s or a little less. That's 30 kg on an engine as yours.
Like Algodoo's planes, the art is adjusting. Just try!

There's something called grid, u know?
Try to use it and not to put boxes randomly

Very good scene!
The tachometer isn't showing RPM's, but RAD/s. Multiply scene.my.rpm with 9.54 aprox. to make the tachometer display the RPM's.

The front suspension is useless

No way you can make it faster without raising frequency. The only thing you can do here is scaling weirdly the whole car or the wheels (monster truck )
BTW that's two v8 engines together (not to confuse with W16)

It can work perfectly at 100 Hz!
Vaidas is totally right, you're the best here. I love how the engine has very low speed but lots of torque. (even if it can be fine-tuned)
And the track is just awesome, very smooth terrain is just what this truck needs.
10/10 (later )

Too good.
You should state that the gears are num1, num2 instead of just 12345