Man, a lot of your stuff is way underrated for the amount of thyme that goes into it
Good job overall. However, when you throw a diagonal at it, it gets completely messed up and just goes around in circles and occasionally says it's stuck...
Hey technically you're an American too, just not in the part I live in
I can tell you right off the bat that that's the best damn suspension I've ever seen on a car
Your peak power is from 200 - 500 rpm where you have about 220 - 230 hp maximum, and 7900 torque max at the very low end of the rev range.
You can shove almost twice as much power into this thing, because the car is 1780kg, so you should be able to put about 450 hp in it, which will make it go like hell
I'm going to try to adapt my dyno to make power/torque curves so it will be easier to understand the engine's power outputs
The engine speeds up and slows down because that's not the engine speeding up by itself, but because it's connected by a braked axle to the load axle which speeds up and slows down because of a math.sin script I added to vary the speed
See, this dyno does not use a braked axle to measure power, rather it controls the speed and uses ToTimp3 (Kilinich taught me that. Mad props to him ) to measure the amount of force applied to that axle by the engine being tested. So, the engine RPM can be easily varied to measure power at different RPMs and this can be used to make power curves
Also, just out of curiosity, who's engine did you test? I found this dyno tends to lose accuracy above about 2000 HP
Faytree, I actually got the Red Devil up to like 280 km/h on a straight but I could never go that fast on the actual course because it would break the suspension Oh well, i'm not even participating in this contest (cause I started it! )
Great job. That suspension is just damn amazing. I was doing a speedrun at the end, and I hit this random piece of terrain at 200 kmh and I thought everything would go straight to hell but it glided over it like nothing had happened
I got it to 373 km/h on my comp before the engine exploded
But there are some problems. Firstly, you deleted the start box and platform.
everyone does this whyyyyyy
Blasted the power rule to bits. This engine gives ~380 hp @ 2000 rpm (the Dyno v2 and v3 both backed me up on this) and the car is only 666 kg ( ) so you would only be able to use 166.5 hp or push the weight to 1520kg.
Also, this scene runs at 220 HZ. This is 100 more than the maximum allowed which was 120. Everyone seems to disobey this...
Good try though. If you fix those things this might do really well
Vaidas - you should submit an entry if you can find some time