Algodoo

Why not just use scripted rev limiter?

I got through in about 18 minutes. Not to mention by the time I finished the roof was gone and most of the rear end was strewn out evenly along the entire course

Well, shit. Now mine's doing it too. I'll try to fix it then update.

SPH is basically water settings. Such as sph.viscostity and density. Apparently, I messed with them and it killed The Linkage's algodoo, and now he hates me. Go figure

And no, I didn't change it yet. Which is weird, because it still won't work on my computer. I'm probably just gonna build a new engine...

Just sayin, you typed in killer := f(alse) on one of the lasers, which fills my console with errors.

Might wanna fix that...

The new engine will probably be a V4 or a rotary of some kind. Maybe even a V8 if I decide it needs more power.

This is one of those times I wish a wild vaidas369 would appear and decide to help me out...

I'm putting an engine in this ASAP

What is? I didn't change the engine yet...

I though you were talking about the engine. And yes, that is a Pokemon joke.

A coke for 1 cent? What is this, 1910?

Ok, you wanted me to improve this?

I don't really know what it is, but I'll *try*....

In order to have hinges stretch like that you need to use hingeConstant, make it really low (like 1e-36) for driveshafts, but I put it much higher for the centrifugal clutch.

I love how some people say 10/10 but don't actually rate

But I am working on a car with a 600hp spawn v12 that I hope can get through this course in under 10 minutes. I will need an average speed of at least 93 mph, and with 600 hp and some scripted suspension I think that is perfectly doable

Sorry lockheed, but I don't know any propellers that can withstand 10 trillion rpm

I did some quick math, and the edge of the flywheel exceeds the speed of light when at full rpm. Sorry Einstein...

...was the axle spinning forwards? Because it will have to spin backwards in order for it to engage, because your value is negative

Car is about 2000kgs, but I used a v12 for smooth torque

A cheap knockoff indeed. The two don't even work on the same principles xD

Look at my 6motor, it's another engine I made. This one is more similar to it...

And I do have a logo. But I almost never use it

Also, this makes 80.1 hp at 40 rad/s. Better than anything I could ever make at 100hz

That 6motor still made over 400 hp, despite the fact that it used lasers for ignition, had no gun-tech and only 1 rotor . Those were the days my engines were awesome looks-wise, but absolute shit in evry other respect . I sucked at pistons back then so I was constantly trying to find ways to generate power w/o using them.

I'm gonna make my own version of this ans upload it, if that's ok with you!

*bows down in amazement*

I tried making a non circular gear once, and it was HARRRDDD. A generator must be super hard too...

Next thing you should try is an asymmetrical gear generator. The ones here are definitely not circular but most are relatively symmetrical.

The engine does nothing at all, because it can't accelerate because the throttle laser isn't there xD

Mabye you should try something else...

And btw, all I did were the wheels and drivetrain. TheGaby1889 made the body...

@s_noonan - Thanks!

@Linkage - Well, it has good power indeed, even for a 4 stroke which has half as many power strokes per revolution as a normal 2 stroke. Considering that IRL this thing only had 25hp, it does pretty well. I could have forced more power out of the engine but this is an old tractor so out would have just made the performance unrealistic

And I would love to see that spring engine. I want to see how you managed to get 4 stroke motion out of a spring engine

@vaidas - Good idea! I'll add that, if I can figure out how....

I was able to just pass 2100 kph before the engine died

It's for Lucas' volvo isn't it?

lol xD

The engine does nothing, and I didn't even make that body....

I was working on an engine for that. I gave up with springs (was never very good at them ) and just used a spawn engine, but never got round to actually putting it in the car

Nice, you got me excited

This is awesome. Nuff said.

But if I were making it, I would've used a 4 or 8 cylinder engine with smaller pistons, because it would give smoother torque output

I'll put my own engine in and reupload it, if thats fine w/ you.

Ok

You're getting a 10, by the way

I also uploaded a V12-powered version of this, it has SOOO MUCH POWERRRR!!!

It still looks nice. I'd be happy if you put some sort of engine into it