Displacement Challenge

[Paradigm 29]

This is not a contest, so there will be no winner; only a list of people who successfully completed the challenge.

Here is a Challenge that can be pretty fun and doesn't have a lot of rules. Complete the challenge and I'll put your name on the list.

Scenario
There is a Red Box and a Light Blue Capture Zone.

Your objective is very simple:
Place the Red Box in the Blue Capture Zone
1. Using no more than 1 motor (no key controls)
2. Without using thyme

Displacemen­t Challenge

Paradigm 29

Rating:
Filesize: 230.13 kB
Comments: 0
Ratings: 1

Displacemen­t Challenge 2

Paradigm 29

Rating:
Filesize: 468.79 kB
Comments: 0
Ratings: 1

Displacemen­t Challenge 3

Paradigm 29

Rating:
Filesize: 470.6 kB
Comments: 0
Ratings: 1

Displacemen­t Challenge 4

Paradigm 29

Rating:
Filesize: 0.52 MB
Comments: 0
Ratings: 2

Displacemen­t Challenge 5

Paradigm 29

Rating:
Filesize: 0.52 MB
Comments: 1
Ratings: 1

MINOR RULES (for those lacking common sense)
Do not modify the objects already in the scene
Do not use the drag tool
Do not use Material Velocity
Do not turn off gravity
Do not use controller acceleration

I have other "challenge" maps already made, but I just wanted to see how everyone receives this first one. I think people who enjoy puzzles will also enjoy solving these challenges.
Here's my solution btw. I enjoyed making it, but then again... it was my idea of fun

Completed Challenge 1:
1. TimTheOne
2. lethalsquirl
3. shamus030
4. The mask
5. Bronie12345
6. a Mammoth
7. coke5

Completed Challenge 2:
1. Fujitsu
2. shamus030
3. Versieon
4. TimTheOne
5. a Mammoth
6. coke5

Completed Challenge 3:
1. shamus030
2. RaRaMalum
3. TimTheOne
4. a Mammoth
5. Nxdt
6. coke5

Completed Challenge 4:
1. TimTheOne
2. Under Ground
3. coke5

Completed Challenge 5:
1. Versieon
2. RaRaMalum
3. pixartist
4. TimTheOne
5. Nxdt
6. docg

[TimTheOne]

Um yea.

i just kept it very simple , however it works , wich is the main thing , right?

well , it works for me , hope it also does on your computer =).

Displacemen­t challenge entry

TimTheOne

Rating:
Filesize: 229.65 kB
Comments: 0
Ratings: 1

*I'll try to be more creative on the next stage =)

[Paradigm 29]

Ooh, quick thinking. The box doesn't go all the way down into the delivery zone, but its no big deal. Since you're first, you're number 1 on the list too

[lethalsquirrel]

i whipped this together in about 20 minutes, i'm gonna put allot more time into challenge 2

Challenge Completion (fixed, kinda)

lethalsquirrel

Rating:
Filesize: 254.02 kB
Comments: 2
Ratings: 3

[Fujitsu]

Here's my personal solution to challenge II. I'll probably put more effort into the next one, as lethalsquirl says.

It sometimes won't work, but usually does. If you are disappointed that the block is not fully placed in the holder, just wait a couple seconds.

Re: Challenge II

Fujitsu

Rating:
Filesize: 460.65 kB
Comments: 2
Ratings: 1

[Paradigm 29]

Tried it a few times, but it worked.

[Shamus]

OMG MOST SIMPLE SOLUTION!!!

Epic solution to challenge 1

shamus030

Rating:
Filesize: 226.7 kB
Comments: 6
Ratings: 2

Took LITERALLY about 5 minutes to get the spring strength and damping JUST right.

[Paradigm 29]

OMG MOST SIMPLE SOLUTION!!!

Epic solution to challenge 1

shamus030

Rating:
Filesize: 226.7 kB
Comments: 6
Ratings: 2

Took LITERALLY about 5 minutes to get the spring strength and damping JUST right.

Did you have fun making this?

[Shamus]

it was fun to make! It started as "HEY! Lets try to use ONLY a spring and get it in, but I went ahead and added 3 boxes.

[Shamus]

NOW WITH EXTRA FIBER! challenge 2 solution... This time a little more complicated. Actually uses a motor this time.

OOPS! put it on the wrong scene... Oh well!

Challenge 2 solution

shamus030

Rating:
Filesize: 492.77 kB
Comments: 1
Ratings: 2

[Paradigm 29]

That's great! And all the solutions so far have been different from each other

[Shamus]

YAY! All three challenges complete! This one doesn't have as high of a success rate as the others. Uses a negative density killer to kill the gravity well once the block is in the right position.

EDIT
OOPS! (again) forgot to put scene in! here it is:

EDIT
OMG!!!! IT DOESNT WORK!! It worked before I saved it, but now it doesn't! darn..,

Challenge 3 solution

shamus030

Rating:
Filesize: 469.38 kB
Comments: 1
Ratings: 2

[Versieon]

Challenge 2 Solution

Versieon

Rating:
Filesize: 478.47 kB
Comments: 1
Ratings: 2

No motors used,
pretty fun challenge
You may have to try more than once, the small scale causes problems with sliding

[Paradigm 29]

YAY! All three challenges complete! This one doesn't have as high of a success rate as the others. Uses a negative density killer to kill the gravity well once the block is in the right position.

EDIT
OOPS! (again) forgot to put scene in! here it is:

Challenge 3 solution

shamus030

Rating:
Filesize: 469.38 kB
Comments: 1
Ratings: 2

Blasphemy! You completed all three challenges with such speed
I'll have to make more challenges now in order to make up for their poor quality.

[Paradigm 29]

Challenge 2 Solution

Versieon

Rating:
Filesize: 478.47 kB
Comments: 1
Ratings: 2

No motors used,
pretty fun challenge
You may have to try more than once, the small scale causes problems with sliding

What a great solution! Quality over speed (looks at shamus030 *sighs), now that's what I'm talking about.

[RaRaMalum]

my entry for challenge 3
seeing as that little red an yellow thing is a racecar it had to be a racetrack.

my entry

RaRaMalum

Rating:
Filesize: 468.81 kB
Comments: 2
Ratings: 3

[Paradigm 29]

my entry for challenge 3

my entry

RaRaMalum

Rating:
Filesize: 468.81 kB
Comments: 2
Ratings: 3

A great solution!

Edit: Added two more challenges. Number 5 is pretty tough.

[Versieon]

Challenge 5 solution

Versieon

Rating:
Filesize: 0.52 MB
Comments: 1
Ratings: 1

Challenge 5,
was I supposed to go around

[Paradigm 29]

Challenge 5 solution

Versieon

Rating:
Filesize: 0.52 MB
Comments: 1
Ratings: 1

Challenge 5,
was I supposed to go around

No, you go whichever way you want. I just put all that stuff there because of Kilinich...
good job. Poor Rara skipped to number 5 so he could be #1 too

[RaRaMalum]

entry to challenge 5

my entry5

RaRaMalum

Rating:
Filesize: 0.54 MB
Comments: 2
Ratings: 2

[Paradigm 29]

entry to challenge 5

my entry5

RaRaMalum

Rating:
Filesize: 0.54 MB
Comments: 2
Ratings: 2

Awesome just like the first one. Too bad you're a slowpoke

[Versieon]

Fixed mine,
RaRamalum, that is realy fun!

[TimTheOne]

Decided to do 4 , because noone has done it yet.

again a very simple one , just becaus ei dont have the time to make a big one now

Challenge 4 entry

TimTheOne

Rating:
Filesize: 0.51 MB
Comments: 2
Ratings: 2

[Fujitsu]

Challenge 4 entry

TimTheOne

Rating:
Filesize: 0.51 MB
Comments: 2
Ratings: 2

No matter how many times I try, it never works for me. Am I doing something wrong, or is it just supposed to land on the capture zone?

[TimTheOne]

hm , weird. maybe its FPS related or something? i'll try to make another solution.